Icaro Tech is recommended for technical dives, but thanks to its lightweight, easy adjustment and comfort, is suitable for all kinds of dives.
Outer blade material: PU resinated Cordura 1000 D
Inner blade materia: PU coated Nylon 210 D
Shoulder pads: urethane draining padding
Dump valves: 2 with traction command
Back pack: in lightweight and tempered naval-aviation alloy
Weight in air (size M - L): 3.050 g
Harness system: adjustable harnesses fixed to the back pack. Quick Release System with closing buckles (50 mm). Chest strap with buckle (40 mm)
D rings: six 50 mm D rings in lightweight naval-aviation alloy
Tank connection system: double fastening band
Icaro is a reliable BCD VEST for all diving purposes. Its very light weight (only 2,7 kg) makes it ideal also for travellers.
Outer blade material: PU resinated Cordura 1000 D
Shoulder pads: urethane draining padding
Dump valves: 2 with traction command
Back pack: in lightweight and tempered naval-aviation alloy
Weight in air (size M - L): 2.700 g
Harness system: adjustable harnesses fixed to the back pack. Quick Release System with closing buckles (50 mm). Chest strap with buckle (40 mm)
D rings: six 50 mm D rings in lightweight naval-aviation alloy
Tank connection system: single fastening band
Outer blade material: 840 D PU coated Nylon
Inner blade material: 420 D PU coated Nylon
Dump valves: 3 with traction command
“D” rings: 2 (50 mm) Stainless Steel + 2 (50 mm) plastic
Weight in air (size L): 3930 g complete with hose and weight pockets
Sternal locking: 25 mm clip adjustable on 2 positions
Back pack: ergonomic, in “Nylon HR” material. New “Fabric Lock” harness system
The new jacket especially conceived for ladies
Outer blade material: 840 D PU coated Nylon
Inner blade material: 420 D PU coated Nylon
Dump valves: 3 with traction command
“D” rings: 2 (40 mm) Stainless Steel + 2 (40 mm) plastic
Weight in air (size L): 3734 g complete with hose and weight pockets
Sternal locking: 25 mm clip adjustable on 2 positions
Back pack: ergonomic, in “Nylon HR” material. New “Fabric Lock” harness system
Optional: trim pockets (code 771) up to 2 kg load per pocket
The "flagship" of the seac bcd range. Over the past years has been the favourite bc vest thanks to its unique technical features, buoyancy and volume distribution.
Outer blade material: PU coated Nylon 1000 D
Inner blade material: PU coated Cordura 1000 D
Dump valves: 3 with traction command
Regulator holder: easy to visualize, provided with elastic holder
Holders: 4 in "Hi-Tenacity" fabric
"D" rings: 3 (50 mm) + 2 (25 mm) hard-anodizing treated "D" rings in tempered naval-aviation alloy
Weight in air (size L): 3.600 g
Sternal locking: 25 mm clip adjustable on 3 positions
Back pack: ergonomic, in "Nylon HR" material. New harness system "Fabric Lock"
Trim pockets: 2, capacity up to 2 kg each
Outer blade material: PU coated Nylon 840 D
Inner blade material: PU coated Nylon 420 D
Dumps valves: 3 with traction command
D-rings: 4 (50 mm) stainless stell "D" rings
Weight in air: (size L) 3.600 g
Sternal locking: 25 mm clip adjustable on 2 positions
Back pack: ergonomic in "Nylon HR" material. New fastening system "Fabric Lock".
QRWS: Up to 4 kg load per pocket
Optional: Trim pockets, up to 2kg load per pocket
With a countless numebr of dives, Pro Tech is the best selling model all over the world. Recommended to all divers.
Outer blade material: PU coated Nylon 1000 D
Inner blade material: PU coated Cordura 1000 D
Dump valves: 3 with traction command
Regulator holder: easy to visualize, provided with elastic holder
Holders: 4 in "Hi-Tenacity" fabric
"D" rings: 3 (50 mm) + 2 (25 mm) hard-anodizing treated "D" rings in tempered naval-aviation alloy
Weight in air (size L): 3.100 g
Sternal locking: 25 mm clip adjustable on 3 positions
Back pack: ergonomic, in "Nylon HR" material. New harness system "Fabric Lock"
Outer blade material: 840 D PU coated Nylon
Inner blade material: 210 D PU coated Nylon
Dump valves: 3 with traction command
“D” rings: 4 (40 mm) plastic
Weight in air (size L): 2725 g complete with hose and weight pockets
Sternal locking: 25 mm clip
Back pack: ergonomic, in “Nylon HR” material. New “Fabric Lock” harness system
Also available in XXS and XS sizes to provide the young divers great comfort and safety
Lightweight and versatile jacket suitable also for the young divers. New ergonomic back pack in "Nylon HR", "Hi-Tenacity" fabric holders.
Outer blade material: PU coated Nylon 840 D
Inner blade material: PU coated Nylon 210 D
Dump valves: 3 with traction command
Holders: 4 in "Hi-Tenacity" fabric
"D" rings: 2 (40 mm) Stainless Steel + 2 (40 mm) plastic
Weight in air (size L): 2.300 g
Sternal locking: 25 mm clip
Back pack: ergonomic, in "Nylon HR" material.
New harness system "Fabric Lock"
Thickness: 5,5 mm
Outer lining: Poly PK
Inner lining: Plush
Zipper: DRY BDM
Anatomical cut
Hood: included
Knees: with rubber pads
Inner seal: Hot Tape
Inflation valve: SI-TECH with side button
Air dump valve: SI-TECH
Wrist closing system: Smooth Aquastop
Hard sole boots
Bag, hose and braces: included
Drysuits 5.5 mm with rigid sole boot
SI-TECH valves, functional and large pockets on the right leg, rubber knees pads.
Thickness: 5,5 mm
Outer lining: Poly PK
Inner lining: Plush
Zipper: DRY BDM
Anatomical cut
Hood: included
Knees: with rubber pads
Inner seal: Hot Tape
Inflation valve: SI-TECH with side button
Air dump valve: SI-TECH
Wrist closing system: Smooth Aquastop
Neoprene boots
Bag and hose: included
Model: one-piece long wetsuit, separate hood and back zip
Thickness: 7 mm
Outer lining: Techspan
Inner lining: Fine Plush
Anatomical cut
Arms & legs: pre-formed and pre-inclined
Stitching: blind-stitching (double thread), Hi-resistance to abrasions
Materials: PUREFLEX is made in Neoprene with Hi-stretchable lining, to facilitate dressing and provide high comfort
Zip: water proof
Knees: with Polyurethane pads
Complement to the one-piece long PUREFLEX man & lady wetsuit
Thickness: 5 mm
Anatomical cut
Zip: YKK with chin zip
Material: Neoprene with Hi-stretchable lining (TECHSPAN)
One-piece long wetsuit with hood in 6.5 mm TECHSPAN, Hi-stretchable Neoprene in every direction, arms and legs pre-formed and pre-inclined, 5 mm vest (optional).
Model: one-piece long wetsuit with hood
Thickness: 6,5 mm
Outer lining: TECHSPAN
Inner lining: Fine Plush
Anatomical cut
Arms & legs: pre-formed and pre-inclined
Stitching: blind-stitching (double thread), Hi-resistance to abrasions
Materials: GLOBAL FLEX is made in Neoprene with high stretchable lining, to facilitate dressing and to provide high comfort
Knees: with Polyurethane pads
Complement to the one-piece long wetsuit GLOBAL FLEX man & lady
Thickness: 5 mm
Anatomical cut
Back zip
Material: Neoprene with Hi-stretchable lining (TECHSPAN)
Model: one-piece long wetsuit, separate hood (optional)
Thickness: available in 6,5 mm and 5 mm
Outer lining: Nylon BFB24
Inner lining: Fine Plush
Anatomical cut
Arms & legs: pre-formed and pre-inclined
Stitching: blind-stitching (double thread), Hi-resistance to abrasions
Materials: PRO FLEX500 is made in Neoprene with stretchable lining, to facilitate dressing and provide high comfort
Forearms & knees: with Polyurethane pads
Complement to the one-piece long wetsuit PRO|FLEX500 man & lady
Thickness: 5 mm
Anatomical cut
Material: Neoprene with stretchable lining
Model: one-piece long wetsuit, separate hood included
Thickness: 6,5 mm
Outer lining: Nylon BFB24
Inner lining: Fine Plush
Anatomical cut
Arms & legs: pre-formed and pre-inclined
Stitching: blind-stitching (double thread), Hi-resistance to abrasions
Materials: S-DRY FLEX500 is made in Neoprene with stretchable lining, to facilitate dressing and provide high comfort
Forearms & knees: with Polyurethane pads
One-piece long wetsuit in 7 and 5 mm. Double-Cuff System at wrists and ankles, rubber knee pads, 5 mm vest with hood (optional).
Model: one-piece long wetsuit, separate hood (optional)
Thickness:
Man available in 7 mm and 5 mm
Lady available in 5 mm
Outer lining: standard Nylon
Inner lining: Fine Plush
Anatomical cut
Arms & legs: pre-formed and pre-inclined
Stitching: blind-stitching (double thread), Hi-resistance to abrasions
Materials: NATURE FIT is made in soft Neoprene to guarantee an high insulation and comfort
Knees: with Polyurethane pads
Complement to the one-piece long wetsuit NATURE FIT man & lady
Thickness: 5 mm
Anatomical cut
Model: two-piece suit
Thickness: 5 mm
Outer lining: Nylon
Inner lining: Plush
Zipper: Standard
Wrists and ankles closing system: Aquastop
Anatomical cut
Knees: with Polyurethane pads
Model: one-piece long wetsuit with hood
Thickness: 5 mm and 7 mm
Outer lining: Standard Nylon
Inner lining: Fine Plush
Zip: Standard
Arms & legs: pre-formed and pre-inclined
Stitching: blind-stitching (double thread), Hi-resistance to abrasions
Knees: with Powertex pads
Shorty suitable for diving in warm waters
Thickness: 3 mm
Outer lining: Nylon/Fine Mesh
Inner lining: standard Nylon
Collar, arm and leg closing: toroidal ring in Smooth Skin
One-piece long wetsuit 3-mm. Collar wrist and ankle closing with toroidal ring in Smooth Skin.
BODY FIT is also available in Shorty men’s & ladies’ version.
Model: one-piece long wetsuit
Thickness: 3 mm
Outer lining: Nylon/Fine Mesh
Inner lining: standard Nylon
Zipper: standard, with high-resistance slider
Collar, wrist and ankle closing: toroidal ring in Smooth Skin
Anatomical and pre-formed cut
Model: shorty
Thickness: 2,5 mm
Outer lining: standard Nylon
Inner lining: standard Nylon
Zipper: front standard
Anatomical cut
3 mm double lining shorty undersuit.
2.5 mm thick vest-type undersuit.
1.5 mm thick glove with Tatex palm.
2.5 mm thick glove in standard nylon with palm in anti-slipper PU.
3 mm thick glove with zipper, palm in Supertex.
3.5 mm thick in Ultratender / Fire Dry with Supertex palm and wrist seal.
3.5 glove in "Smooth Skin"; inner lining in Fire Dry.
5 mm thick in Ultratender / Fire Dry with Supertex palm and wrist seal.
3.5 thick glove with velcro closing.
Palm in anti-slipper PU
Hard sole boot designed for use with soft boot dry suits.
3.5 mm thick anatomic boot with end section in "Smooth Skin" and Supertex sole.
High wearability 6 mm thick boot. High grip hard sole, inner side in Fire Dry.
4.5 mm thick anatomic boot with end section in "Smooth Skin" and Supertex sole.
5 mm thick boot with semi-rigid sole, height 7 inches, inner side in Standard Nylon.
3.5 mm thick boot in "Smooth Skin", with outer lining and sole in Powertex.
2.5 mm anatomic boot in Standard nylon.
Standard Nylon/Plush with face contour area in "Smooth Skin".
Standard Nylon/Plush with face contour area in Smooth Skin and neck collar in SCS Metal.
Double flange hood in Ultraspan/Fire Dry. Insert with holes.
Pre-formed, 3-finger gloves, 7 mm back, 5 mm palm
Certified CE EN 250 2000
Extended certification for cold water diving < 10°C RINA 0474
First stage
First stage made of die-cast brass, polished chrome-plate finish
Working system: balanced diaphragm
2 HP ports
4 LP ports, two of which reclined by 30 degrees to facilitate hose positioning
Ergonomic hand grip ensures easy attachment to cylinder
Available in 230 BAR yoke connection, 230 BAR DIN and 300 BAR ICE DIN
"Ice" kit available (optional)
Second stage
Lightweight and compact 2nd stage ensuring great hydrodynamics
Dive/Pre-Dive
Large surface exhaust valve eases exhalation
Large rubber front cover allowing simple manual purging even when wearing gloves
Safety locking diaphragm system ensures perfect stability and performance
Exhaust tee with built in chin-rest provides added stability
Asymmetric design lever allowing maximum valve opening, improving deep water performance
New ergonomic mouthpiece avoids jaw fatigue
Certified CE EN 250 2000
Extended certification for cold water diving < 10°C RINA 0474
First Stage
Manufactured from plated brass with polished chrome provides high resistance to salt corrosion
Working system: compensating piston
1 HP port
4 LP ports
Rubber protection cap
8 slots to ease hydrostatic compensation and improve performance in cold waters
Ergonomic hand grip ensures easy attachment to cylinder
Available in 230 BAR yoke connection and DIN 230 BAR
300 BAR DIN kit available (optional)
Second Stage
Lightweight and compact 2nd stage ensuring great hydrodynamics
Dive/Pre-Dive
Large surface exhaust valve eases exhalation
Large rubber front cover allowing simple manual purging even when wearing gloves
Safety locking diaphragm system ensures perfect stability and performance
Exhaust tee with built in chin-rest provides added stability
Asymmetric design lever allowing maximum valve opening, improving deep water performance
New ergonomic mouthpiece avoids jaw fatigue
Certified CE EN 250 2000
Extended certification for cold water diving < 10°C RINA 0474
First Stage
Manufactured from plated brass with polished chrome provides high resistance to salt corrosion
Working system: compensating piston
1 HP port
4 LP ports
Rubber protection cap
8 slots to ease hydrostatic compensation and improve performance in cold waters
Ergonomic hand grip ensures easy attachment to cylinder
Available in 230 BAR yoke connection and DIN 230 BAR
Second Stage
Lightweight and compact 2nd stage ensuring great hydrodynamics
Dive/Pre-Dive
Large surface exhaust valve eases exhalation
Large rubber front cover allowing simple manual purging even when wearing gloves
Safety locking diaphragm system ensures perfect stability and performance
Exhaust tee with built in chin-rest provides added stability
Asymmetric design lever allowing maximum valve opening, improving deep water performance
New ergonomic mouthpiece avoids jaw fatigue
1000 mm yellow hose for easier identification
Certified CE EN 250 2000
Extended certification for cold water diving < 10°C RINA 0474
Auxiliary second stage with 100 cm hose guarantees excellent performance with any combination of first stage.
Certified CE EN 250 2000
Extended certification for cold water diving < 10°C RINA 0474
First stage
Compact shape with shiny chrome-plated finish that is highly resistant to salt corrosion
Working system: balanced diaphragm
2 HP ports
4 LP outputs of which two with preferential “top flow” for connecting the second stage
Ergonomic cuff (INT version) for a perfect seal
Available version INT and DIN 230 BAR
Second stage
Lightweight and compact 2nd stage ensuring great hydrodynamics
Dive/Pre-Dive
Large surface exhaust valve eases exhalation
Large rubber front cover allowing simple manual purging even when wearing gloves
Safety locking diaphragm system ensures perfect stability and performance
Exhaust tee with built in chin-rest provides added stability
Asymmetric design lever allowing maximum valve opening, improving deep water performance
New ergonomic mouthpiece avoids jaw fatigue
Certified CE EN 250 2000
Extended certification for cold water diving < 10°C RINA 0474
First stage
Compact shape with shiny chrome-plated finish that is highly resistant to salt corrosion
Working system: compensanting piston
1 HP port
5 LP ports
Available version, Thread Connection EN 144-3 230 BAR
Version for use with oxygen mixture up to 99%
Assembled with oxygen-compatible components and lubricants
Second stage
Lightweight and compact 2nd stage ensuring great hydrodynamics
Dive/Pre-Dive
Large surface exhaust valve eases exhalation
Large rubber front cover allowing simple manual purging even when wearing gloves
Safety locking diaphragm system ensures perfect stability and performance
Exhaust tee with built in chin-rest provides added stability
Asymmetric design lever allowing maximum valve opening, improving deep water performance
New ergonomic mouthpiece avoids jaw fatigue
Version for use with oxygen mixture up to 99%
Assembled with oxygen-compatible components and lubricants
Green cap for precise identification
Auxiliary second stage with 100 cm hose guarantees excellent performance
Version for use with oxygen mixture up to 99%
Assembled with oxygen-compatible components and lubricants
Green cap for precise identification
Mechanism: Bourdon (Patented)
Module: stamped and chrome plated brass
Hose: Hi-resistant HP hose
Thread: male 7/16” female 7/16”
Hose length: 800 mm
Face: luminescent
Glass: Hi-resistant Polycarbonate
Range: BAR 0 - 400 (10 bar increment)
Certified CE EN 250
Mechanism: spiral (Patented)
Module: stamped and chrome platted brass
Hose: Hi-resistant HP hose
Thread: male 7/16” female 7/16”
Hose length: 800 mm
Face: luminescent
Glass: Hi-resistant Polycarbonate
Range: BAR 0 - 400 (10 bar increment)
Certified CE EN 250
Pressure Gauge
Technical Details: same as Pressure Gauge Compact code 2240
Depth Gauge
Module: Hi-resistant ABS
Dial: luminescent.
Glass: Hi-resistant Polycarbonate
Range: BAR 0 - 70 metres (1 Mt. increment)
Mechanism: patented Bourdon System (oil dipped)
Certified CE EN 250
Mechanism: spiral (Patented)
Module: stamped and chrome platted brass
Hose: Hi-resistant HP hose
Thread: male 7/16” female 7/16”
Hose length: 800 mm
Face: luminescent
Glass: Hi-resistant Polycarbonate
Range: BAR 0 - 400 (10 bar increment)
Certified CE EN 250
Pressure Gauge
Mechanism: spiral (Patented)
Module: stamped and chrome platted brass
Hose: Hi-resistant HP hose
Thread: male 7/16” female 7/16”
Hose length: 800 mm
Face: luminescent
Glass: Hi-resistant Polycarbonate
Range: BAR 0 - 400 (10 bar increment)
Certified CE EN 250
Depth Gauge
Range: 0 - 80 metres (1 Mt. increment) with reset system
Mechanism: patented Bourdon System (oil dipped)
Certified CE EN 250
Module: ABS Hi-resistant
Dial: luminescent
Glass: Hi-resistant Polycarbonate
Range: 0 - 70 metres (1 Mt. increment)
Mechanism: patented Bourdon System (oil dipped)
Mechanism: dampered precision movement
Module: ABS Hi-resistant
Glass: Hi-resistant Polycarbonate
Range: 0°- 360° (10 degrees increment)
Features: Light and compact wrist compass with rubber wrist band
Mechanism: dampered precision movement
Module: Hi-resistant ABS
Glass: Hi-resistant Polycarbonate
Range: 0°- 360° (10 degrees increment)
Case: matt finish steel
Movement: Citizen quartz
Water resistant: 20 ATM
Glass: unscratchable mineral with seal. Band for divers included
Alloyed Chromealloy steel 34CRM04.
Made from steel plate
Valves: Single and twin valve type in chrome plated matt finish brass, with DIN-INT connection, lead of thread M 25 x 2
External treatment: shotblasting with selected grit, 1 protecting zinc layer, 90 micron thick, 5 layers of double-component epoxy primer, 3 layers of polyurethane finishing painting with “wet on wet” system, black-white sectors complying with EC regulations